Ten Years with Delta

Ten Years with Delta

The first modifications to the Delta machine were made immediately after the first five machines, when an improvement to the pressure roll mounting was implemented. This led not only to easier replacements, but the modification was also necessitated by a general increase of the roll diameter, which resulted also in an extension of its service life. The first significant modification came only after the completion of the first 60 machines; it improved the comfort of machine operation. A new Mitsubishi platform was used within the framework of this modification and the machine was equipped with a new display. It is possible to enter temperatures of individual sections of the laminating roll and display machine and separator speed on-screen, and a brand-new diagnostic system was also added. The next Delta machine modification was made from serial number 138 onward. Another modification was implemented after the production of the 200th unit; this change was a general equipment development for finishing. The transition to loading head control through a servomotor instead of a variator, which had been used until then, was a fundamental change. This modification allowed for more precise sheet adjustment and easy, quick and precise format length adjustment directly via the touch screen and a number of other innovations. Increased production speed from 20 to 30 metres per minute also represented a principal change. The introduction of a new loading head, custom designed by Komfi, which allows for the more precise use of a wide range of materials was the last modification to be made. Internet connection allowing the technicians to carry out remote analyses for potential machine defects is a matter of course.



© 2017, KOMFI spol. s r. o.

Private policy | Sitemap

Created by eBRÁNA s.r.o. | Powered by CMS WebArchitect | SEO a internetový marketing